techliminals.com logo
Sitemap
techliminals.com > GE 33711 universal remote

GE 33701 4-device universal remote set up instructions and pairing codes

GE 33711 4-device universal remote control

The GE 33711 universal remote can operate up to four audio and video devices such as TVs, Blu-ray/DVD players, Cable and satellite receivers, Soundbars, Streaming media players and more. It works with all major brands and supports thousands of the latest audio and video devices (except radio frequency devices like Roku Streaming Sticks and Amazon Fire TV Sticks). The brushed graphite finish adds an extra touch of elegance to any décor while its ergonomic design fits comfortably in hand.

The GE 33711 remote is designed to control multiple audio/video devices. To be able to use, you will need to program the remote for all of your devices. There are two different methods you can use to program the remote: Direct Code Entry or Auto Code Search. The Direct Code Entry method is recommended, as it is the simplest and quickest. The Auto Code Search method searches through all the codes to find a compatible code for your device so it may take longer to set up.

 

Direct Code Entry

  • Press and hold down the SETUP button on the remote until the LED turns on and remains on.
  • Press and release the device button for the type of device you wish to control (tv, cbl, dvd or aux). The LED will blink once and remain on.
  • Enter the first 4-digit code from the pairing code lists. The LED will turn off after entering the 4th digit.
  • Point the remote at the device and test all buttons to see if the device responds as you would expect. If the buttons do not operate the device, start the procedure again and enter the next code.
 

Pairing codes for common TV brands

Note: Only the most common brands are shown here. To find out the codes for other brands visit this or this page. The second page has way more brands and updated codelists.
 
 

Pairing codes for common Audio device brands

Note: Only the most common Audio brands are shown here. To find out the codes for other brands visit this page.
 
 

Pairing codes for common DVD/Blu-ray brands

Note: Only the most common DVD/Blu-ray player brands are shown here. To find out the codes for other brands visit this page.
 
 

Pairing codes for common STB brands

Note: Only the most common Cable/SAT Set Top Box brands are shown here. To find out the codes for other brands visit this page.
 
 

Auto Code Search

  • Press and hold down the SETUP button on the remote until the LED turns on and remains on.
  • Press and release the device button for the type of device you wish to control (tv, cbl, dvd or aux). The LED will blink once and remain on.
  • With the remote pointed at the device, press and release the POWER button. The remote will send 10 different codes to the device. The LED will blink once for each code and remain on after sending the 10 codes. If the device does not respond, press and release the POWER button again. Do this step until your device responds.
  • When the device turns off, turn it back on. With the remote pointed at the device, press and release the VOL+ button again and again until the device turns off again (the remote will resend the 10 codes one-by-one).
  • When the device turns off, press and release the same device button you pressed in the second step to store the code.
  • Point the remote at the device and test all buttons to see if the device responds as you would expect. If the buttons do not operate the device, start the procedure again.
 

PDF manual for GE 33711 (and 33709, 33710, 33711, 34457, 32934)

GE 33711 universal remote control manual (PDF)