techliminals.com logo
Sitemap
techliminals.com > Philips SRP6249B/27 universal remote

Philips SRP6249B/27 6-device universal remote set up instructions and pairing codes

Philips SRP6249B/27 6-device universal remote control

The Philips SRP6249B/27 6-device universal remote operates up to six Audio and Video devices such as TVs, Blu-ray/DVD players, SoundBars, Cable and Satellite Receivers, and more. It works with all major brands and supports thousands of the latest audio and video devices. It's preprogrammed for immediate use with Samsung TVs and Roku streaming media boxes.

To be able to use the Philips SRP6249B/27, you will need to program it for your devices. There are two different methods you can use to program the remote: Direct Code Entry or Auto Code Search. The Direct Code Entry method is the recommended method as it is the simplest and quickest method in most cases. Auto Code Search may take longer to set up, as it searches through all the codes to find a compatible code.

 

Direct Code Entry for Philips SRP6249B/27

  • Press and hold down the SETUP button on your Philips remote until the LED turns on and remains on.
  • Press and release the device button for the type of device you wish to control (TV, STR, DVD, AUD, CBL or AUX). The LED will blink once and remain on.
  • Enter the first 4-digit code from the code lists. The LED will turn off after entering the 4th digit.
  • Point the remote at the device and test all buttons to see if the device responds as you would expect. If the buttons do not operate the device, start the procedure again and enter a different code.
 

Pairing codes for common TV brands (Philips SRP6249B/27 - CL4/CL5/CL6)

Note: Only the most common brands are shown here. To find out the codes for other brands visit this or this codelist page. The second page has way more brands and updated codelists.
 
 

Pairing codes for common Audio device brands (Philips SRP6249B/27 - CL4/CL5/CL6)

Note: Only the most common Audio brands (Amplifiers, SoundBars, Receivers, etc.) are shown here. To find out the codes for other brands visit this Philips Audio codelist page.
 
 

Auto Code Search for Philips SRP6249B/27

  • Press and hold down the SETUP button on your Philips remote until the LED turns on and remains on.
  • Press and release the device button for the type of device you wish to control (TV, STR, DVD, AUD, CBL or AUX). The LED will blink once and remain on.
  • With the remote pointed at the device, press and release the POWER button. The remote will send 10 different codes to the device. The LED will blink once for each code and remain on after sending the 10 codes. If the device does not respond, press and release the POWER button again. Do this step until your device responds.
  • When the device turns off, turn it back on. With the remote pointed at the device, press and release the VOL+ button again and again until the device turns off again (the remote will resend the 10 codes one-by-one).
  • When the device turns off, press and release the same device button you pressed in the second step to store the code.
  • Point the remote at the device and test all buttons to see if the device responds as you would expect. If the buttons do not operate the device, start the procedure again.
 

PDF manual

Philips SRP6249B/27 universal remote control manual (PDF)